Designed specifically for float planes like the Giant-scale Dehavilland Beaver, this NavLight Set includes everything you need to add scale realism to your model. Made using our new line of 8mm "Straw Hat", high-brightness 1/2 watt LEDs, it features two Wingtip Lights (1 x Green, 1 x Red), two White Double-Blink Strobes, one Red Double-blink Strobe, one White Solid Tailcone Light, and two White Landing Lights, together with LED holders for all 8 LEDs and a pair of our 6-pin connectors for wing disconnects, if needed. The two White and one Red Double-blink Anti-Collision Strobes blink in an asynchronous (alternating) pattern, while the Landing Lights pulse back and forth in what is usually referred to as a "Wig-Wag" pattern, something that is unique to many float planes like the Beaver and the Cessna Bushmaster. It connects directly to your receiver, and even though these are some of the brightest LEDs for their size that you'll find anywhere, they still do not draw enough current to require a separate battery.
New Option: For those customers who prefer to power their NavLights from an external battery pack, we now offer an External Power Pack that can be ordered sepeartely. It includes a 2S 7.4 volt Li-Po battery and all the cables necessary to power the circuit.
DOWNLOAD: DeHavilland Beaver NavLights Manual
NavLights for DeHavilland Beaver
All of the new 8mm NavLight Sets feature an on-board regulator, so they can be used with any receiver, any size receiver battery, including HV (high voltage) systems. No need for a seperate BEC, the circuit will accept whatever voltage you may have coming from your receiver. The larger, brighter 8mm LEDs look much more scale-like on today's larger models, and each set comes with black plastic holders for the LEDs, as well as a pair of our 6-pin connectors that can be easily installed at any place in the wiring to allow for easy removal of a wing or wing halves.
This unit features 3 modes of operation:
Mode 1: All Lights OFF
Mode 2: Wingtip, Anti-Collision, Tail Cone, and Beacon ON
Mode 3: Landing Lights ON
The three modes can easily be programmed to be activated by a 3-position switch on your transmitter, or can be selected by a knob or slider if you prefer. Programming is done just like a servo device, as the channel is moved from one side (or point) to the other, the modes change from 1-2-3, 3-2-1 as normal.
Wire lengths are 60" on the two Wingtip LEDs, the Anti-Collision Strobe LED and the Rotating Beacon LED, 72" on the Tail Cone LED, and 30" on each Landing Light LED. All wires can be easily shortened or lengthened as needed using regular speaker or zip wire.
If you need longer wire lengths, or any other modification or custom feature, just use the Contact Form to let us know what you need and we'll be happy to work with you to get you the exact NavLight Set you need.
Weight: 80 grams
