This navigation light set is specifically designed for the new Legend Hobby OA-1K Skyraider II and the Air Tractor ARFs. It features our 8mm 1/2 Watt Straw Hat LEDs, which are much brighter than the "standard" 5mm or even 8mm LEDs in lower wattage sizes. And the 8mm LEDs feature a unique "Straw Hat" lens that spreads the output of the LED in a 120 degree angle, so they are much more visible when viewed "off angle", meaning they do not have to be viewed directly from the front.
The Legend Hobby AO-1K Skyraider II / Air Tractor NavLights Kit features two Wingtip Navigation Lights (1 x red/1 x green), two Asynchronous Wingtip Strobes (white), one Tailcone/Rudder Light (white), and two Nose Cone Landing Lights, all of which are switchable from the transmitter. The Asynchronous Wingtip Strobes are set to a double-blink pattern that alternates from one to the other in a pattern that is scale for this aircraft. The Landing Lights can be set to either a “normal” solid “On” pattern, or to a “Wig-Wag" pattern that is scale for the Air Tractor. Adjust the upper End Point to switch the Landing Lights from solid “on” to “wig-wag”.
The unit plugs into any spare channel, allowing full control of the three modes that control the lights. High-brightness LEDs and a low-drain microcontroller circuit mean that it can be safely powered by the receiver's battery, no extra battery is required.
DOWNLOAD: Legend Hobby Legend Hobby OA-1K Skyraider II / Air Tractor NavLights Instruction Sheet
Legend Hobby AO-1K Skyraider II/Air Tractor NavLights
Wires on wingtip navigation lights, the tailcone light, and the wingtip strobes are 72" long. Wires on the Nose Cone Lights are 36" long (each).
Also included are 2 x 20mm LED Reflectors, 5 x Led Holders, and a pair of our 6-pin MPX connectors for installations that require removal of the wing or wings. A 3D Printed Case for the circuit board is also included. This circuit is regulated, so it is compatible with receivers running at any voltage, including high-voltage (HV) receivers. The LEDs are powered from your receiver, so no additional battery is necessary.
New Option: For those customers who prefer to power their NavLights from an external battery pack, we now offer an External Power Pack that can be ordered separately. It includes a 2S 7.4 volt Li-Po battery and all the cables necessary to power the circuit.
Below is a link to a video we have posted to our YouTube channel showing more detail of this navigation light set.
